FLAIL MOWER CONTRACTOR SERIES III – 2400

Description Large 194mm (7.6 inch) diameter blade shaft for increased strength and superior balancing Blade shaft runs on 60mm dual race SKF bearings with external access 194mm Diameter rear roller running on 45mm bearings High discharge design to increase ground speed Spiral placement of cutting blades to maximise the efficiency of the machine reducing the power required to drive the mower Ability to set extra high cut (up to 100mm) which is ideal for heavier conditions as well as areas where there may be objects protruding out of the ground such as rocks or tree stumps When fully side shifted to the non-belt side the cut will extend 1,500mm from the tractors centreline When fully side shifted to the belt side the cut will extend 1,300mm from the tractors centreline ***SEE SIZING GUIDE AND COMPARISON SHEET BELOW*** Specifications   Horsepower 70-130hp Cut Width 2,400mm Cut Height 50-100mm Sideshift Hydraulic Blade shaft 194mm Qty blades 34 Std blades Hammer type Belts 5 X B Section Bearing SKF Deck thickness 6mm Hitch pins CAT 2 PTO rpm 540 Overall width 2,710mm Weight 1,090kg   The PTO shaft is included in the price The gear box and shaft require oil, to ensure the unit is filled in the correct location/s, to the correct level with the correct oil we suggest having us fill it at a charge of $20 inc gst The product is shipped in a steel frame to enable cost effective freight therefore some assembly is required 12 months manufacturing warranty (Excludes consumables such as blades & belts) and 24 months gearbox warranty