Bought elsewhere. It’s nice. Just had to figure out, because not English. Follow pictured steps, attach the white thing (using the little silver screws and the screwdriver) w/the magnet facing out. Glue the pegs in the holes pictured. Be sure correct holes. Use the long black screws and the Allen wrench to attach the shelves. Slide the backing boards into place. Loosen screws on the right side of the cabinet, for the installation of the doors. Remove film from doors. Use the little silver screws and screwdriver to attack the metal thing with the two hole to the underside of the doors, as pictured. Use the two other screws (there are only 2 of this type) to screw in the knobs on the doors. Put the pegs in the ends of the doors, as pictured. Slide the first door into place with the left side. Then slide the right wall of the cabinet out enough to slip the right side into its groove. Then do the same for the second door. Last two long black screws-attach long thin piece of wood to top. Tighten all screws!